Multicast Stopped Working on My A540 STBs

Topics related to delivering files to Set-top Boxes.

Multicast Stopped Working on My A540 STBs

Postby Henry.G » Sat Sep 14, 2013 1:46 pm

After I used the web forms to change TV settings on my A540 the multicast files reception stopped working. Only FTP works now. The EPD Settings look OK but the files I send to the A540 don't seem to arrive. How can I analyze this further?
Henry.G
 
Posts: 45
Joined: Mon Apr 25, 2011 12:54 pm

Re: Multicast Stopped Working on My A540 STBs

Postby Cilutions Support » Sat Sep 14, 2013 1:57 pm

If you are running a release earlier than November 2013, and using multicast file reception, then do not use the port 80 URL to make configuration changes on the A540. Use the port 88 URL instead.

For example, if you would use the following URL to make config changes: http://192.168.1.156 use this instead: http://192.168.1.156:88/config

Also, to recover an A540 which fails multicast reception for this reason run the following procedure:

    telnet into the A540
    login as root
    Run: cp /mnt/nv/pdr.ini /PVR/pdreceiver

Then use the port 88 URL to reset your EPD multicast settings.
Cilutions Support
Site Admin
 
Posts: 139
Joined: Mon Feb 07, 2011 3:03 pm


Return to STB-Specific Content Distribution

Who is online

Users browsing this forum: No registered users and 1 guest

cron