Are There HDMI Stats?

Guides to help new users set up the various DMB Products

Are There HDMI Stats?

Postby Henry.G » Tue Aug 19, 2014 5:35 pm

Does the A540/A140 show the status of the HDMI connection to a local TV? How can I tell if a TV is working without being in front of it?
Henry.G
 
Posts: 45
Joined: Mon Apr 25, 2011 12:54 pm

Re: Are There HDMI Stats?

Postby Cilutions Support » Tue Aug 19, 2014 5:42 pm

Yes. From a telnet or ssh connection to the STB, logged in as root, the following files report information about the local TV connected over HDMI.

/proc/avcore/hdmi_connected (1 = yes, 0 = no)
/proc/avcore/hdmi_sink_product_info (Manufacturer, Model, stuff like that)
/proc/avcore/hdmi_sink_supported_res (All the various resolutions the TV supports, e.g., 1920x1080i_59_94_60Hz_16_9)

These are all text files so you can just cat them out to the screen.

Also, you can gather them using the finstall_ftp remote job entry command described elsewhere in the forums.

Note that this information is useful but it may not tell the complete story. A TV can appear as connected even if it is tuned to another video source (e.g., not the HDMI from the STB). So this command is useful to prove that the HDMI cabling is correct but another method is needed, like the RS232 TV control connection, to force the TV on and to force it to the input which plays the STB display.
Cilutions Support
Site Admin
 
Posts: 139
Joined: Mon Feb 07, 2011 3:03 pm


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 1 guest

cron