man page for stbremoteconf

This forum includes general topics related to managing Cilutions products.

man page for stbremoteconf

Postby Cilutions Support » Sat Jan 04, 2014 11:57 am

NAME:

stbremoteconf - provides a mechanism for remotely configuring and controlling a local network of Amino STBs. It is a command line program which interacts with one or more A140/A540 STBs in an enterprise network.

USAGE:
Code: Select all
Usage: [-p <Prodlist> | -m <MACAddress> | -s <SerialNumber>] [-e <expiry>] [-t <mcast ttl>] [-u <UDP response timeout>] [-P <port>] <SAVE | host | mcast address> <command>
  -e <expiry> = a Unix format date/timestamp after which the command expires
  -P <port> = The port used to send multicast commands (default = 22222)
  -u <UDP response timeout> = Maximum time to wait for replies to multicast commands to arrive (default = 10 seconds)
  The following options CANNOT be used together (i.e only ONE can be used at a time):
  -p <Prodlist> = a comma-separated list of product codes eg 125,110,130,530,M030,M032,130h,130m,110h,A540,A140,A129
  -m <MACaddress> = a comma-separated list of MAC addresses - only STBs with a matching MAC address respond
  -s <Serial Number> = a comma-separate list of serial numbers - only STBs with a matching Serial Number respond

Commands:
   CHANNEL <channel number>
   CHANGEPAGE <url>
   DEFAULT_VOLUME <0-100> allows the volume level on an STB to be set.
   DELETECUSTKEY (delete the customer key)
   EAS <message> (can be XML data)
   ETHERNET <AUTO | 10HD | 10FD | 100HD | 100FD>
   FETCHFILE <localpath> <remotepath> will fetch a file from an STB and store it locally
   GETCONFIG <libconfig value to read>
   GETDI
   GETSTAT <System.Uptime | System.TotalUptime | Fan.OffDuration | etc.> (*)
   GETVERSION (get software version string)
   HWINFO (get hardware information)
   LOGREAD
   MCASTADDR <address> (default is 225.10.10.10)
   OUTFMT <CVBS-RGBON | CVBS-RGBOFF | LC-RGBON | LC-RGBOFF | CVBS-LC | CVBS-LBR | LBR-CVBS-LC | RGB-CVBS-LC>
   OUTRES <SD | 480P | 576P | 720P | 1080I | 1080P>
   PING <host> <count> <backoff>
   PROC <proc entry>
   PS <param> (do a ps on the STB)
   REBOOT
   REFLASH (wipe NAND flash and then download new software)
   REMOTELOGGING <ON|OFF> [RemoteServerIP[:port]] [Time to log for]
   SETCONFIG <libconfig value to set> <value to set>
   SIGNEDCMD <file>
   SMART <drive number> <offlinetest|shortselftest|longselftest|conveyanceselftest> (*)
   STATS (get status information)
   SYSLOG <host>
   TVSYSTEM <NTSC-M | NTSC-J | PAL-I | PAL-M | PAL-N | PAL-B | PAL-G | PAL-H>
   UPGRADE <uri> (*)
   UPGRADEMCAST <address> <port> (*)
   UPGRADEMCAST_VER <address> <port> <full software version string> (*)
   VOD <PLAY | PAUSE | STOP | FF | RW>
   REFORMAT (Set flag to reformat PVR Hard Disk and reboot)
   SNAPSHOT <Location to store snapshot file> Request a snapshot file to be sent back by the STB

Notes:
REFLASH will also wipe the persistent settings held in NAND flash
(*) command not supported by all STB software versions


DESCRIPTION:

This Windows command-line program is provided by Cilutions and supports management of Enterprise-deployed Amino STBs. It is included in maintenance support and further documentation is available by contacting support@cilutions.com. Operators should only use stbremoteconf when fully aware of the implications for the collection of STBs in the network. It is intended for use by knowledgeable network administrators only.

Example of How to Gather Debugging Information from an Amino STB:
stbremoteconf 192.168.1.133 SNAPSHOT C:\Temp\Snapshot_133.txt

Note: The stbremoteconf commands can be used alongside SNMP commands described here: viewtopic.php?f=14&t=106#p953. Both these command sets provide complementary capability useful for total STB management.
Cilutions Support
Site Admin
 
Posts: 139
Joined: Mon Feb 07, 2011 3:03 pm

Return to Remote Management General Issues

Who is online

Users browsing this forum: No registered users and 2 guests

cron